Immersion Heated 1500L Emergency Tank Shower

Immersion Heated 1500L Emergency Tank Shower

Designed to meet and exceed ANSI and Australian standards, this immersion heated emergency tank shower provides tepid water in cold environments for over 15 minutes at a guaranteed flow of 76 litres per minute, even when there is no mains water supply. Suitable for use in hazardous and non-hazardous environments.

  • Integral immersion heater, controlled by a dual thermostat, maintains the water in the tank at a constant temperature
  • Low pressure shower rose delivers large quantities of water in an even pattern that is non-injurous to the user
  • Thermal insulation assists in maintaining the water temperature in the tank
  • Instant activation by panic bar or optional foot panel
  • Optional eye/face wash can be mounted internally or externally

Electrical supply: 230V Single Phase, 50/60Hz (110V optional)

Weight 340 kg
Dimensions 1420 × 1495 × 3746 mm
Features Integral immersion heater, controlled by a dual thermostat, maintains the water in the tank at a constant temperature.
Low pressure shower rose delivers large quantities of water in an even pattern that is non-injurous to the user.
Thermal insulation assists in maintaining the water temperature in the tank to international standards in all climates.
Instant activation by panic bar or optional foot panel.
Optional eye/face wash can be mounted internally or externally.
Optional chiller unit for hot climates.
Electrical supply: 230V Single Phase, 50/60Hz (110V optional).
Location: Indoor, Outdoor
Climate: Hot (risk of over-heating), Cold (risk of freezing), Variable
Installation: Free Standing / Floor Mounted
Features: Eye/Face Wash
Framework: Stainless Steel
Capacity (Litres): 1500
Inlet Connection Size & Type 3/4” BSP Female
Shower Operation Panic bar (optional foot panel control)
Eye/face Wash Operation Lift lid up (optional foot treadle control)
Supply Pressure 0.5 to 10 BAR G (7 to 145 PSI)
Flow at Operating Pressure Shower – 76 litres/minute
Eye/Face wash – 12 litres/minute
Electrical Equipment – Non-hazardous Suitable for use in areas classified as non-hazardous
Electrical Equipment – Hazardous ATEX Zone 1 & 2. Gas groups IIA & IIB. Temp Class T3 (IIC available)
Materials of Construction Shower Rose: GRP stainless steel
Piping & Valve Materials: uPVC and stainless steel
Control Valve – Shower: uPVC 11/2” BSP ball valve
Control Valve – Eye/face Wash: 1/2” 316L stainless steel full flow ball valve with stainless steel ball
Eye/face Wash Strainer: 1/2” stainless steel
Overflow: 1” BSP uPVC
Ballcock Valve: 2 x 1/2” BSP brass
Water Tank: 1500 litre (396 US Gallons) capacity heavy density polyethylene HDPE
Tank Surround and Lid: Heavy-duty GRP in white (green or yellow available)
Shower Frame and Legs: Stainless steel. Polished brush finish (paint options available)
Pull Rods for Valve Activation: Stainless steel
Foot Control Options: Panel foot control – Stainless steel/Treadle foot control – powder coated stainless steel
All Fasteners and Fixings: Stainless steel
Minimum Ambient Operating Temperature 16º C (60º F) (For 0º C (32º F)
Maximum Ambient Operating Temperature 40º C (104º F) (+55º C (131º F) with cooling unit fitted)

YOU MAY ALSO LIKE

Discover our top picks just for you!